Knife Build #29
I ordered this Hock Paring Knife Kit from Hock Tools. The 3.5 inch paring knife kit consists of a wonderful Hock blade and the necessary pins. The kit is Model #KP350. This knife is for Daniel. It will have African padauk handle scales. For the most part, all of the steps in this process are identical to the first knife.
|
|
The RX90 sanding sequence was 80x, 150x, 220x, 320x, to 400x.
|
Wet sanding was performed on saturation coats of
my shop mixed wiping varnish...sequence was 400x, 600x,
800x, 1000x, 1500x.
|
Blade sharpening was performed with
Wicked Edge. Angle was reground at 19° with 100x
through 1000x diamond stones. Then polished with 1200x-1600x
ceramic stones.
Final polish .6 μ
ceramic stone.
Finished knife.
|