Fret Saw Jig Project
While waiting for the arrival of a new scroll saw, I needed to do some fret saw work. I wanted a decent way to hold the work piece steady for the proper method of fret or coping saw cutting. Saw a simple look online... |
|
Created a prototype in radiata pine... |
|
I played around with a variety of holding techniques on the workbench...I settled on a bench stop to prevent lateral movement and a Gramery hold down for secure hold. |
|
A 6 inch UniKlamp holds the workpiece to the jig. |
|
First work was to round off some purpleheart for a knife blank... |
|
The work was well held for the fret saw as well as for working with a rasp. |
|
|