Dust Collection Router Table |
|
| The router table is a custom built router table with a Bench Dog top, fence, and feather boards. Holds a 3hp variable speed Porter Cable 3518 production router. |
|
The Bench Dog fence has a 2.5 inch dust
collection port built into the back of the fence. |
 |
A Rigid table saw dust hood was modified
and installed under the router. It has a 2.5 inch dust port. |
|
A hose connection was constructed out of
2.5 hose, two 2.5 bridge clamps. A 2.5 to 4 inch adapter was JB welded
to a 4" Rockler dust port quick connect. |
 |
The Rockler Dust Right® quick connect port. |
 |
A four inch port was attached to the unit. This fitting has
a swivel 2 1/2 inch port.
|
 |
A Dust Right flex hose connects the output
to the under bench cutoff. |
|
The router table is pulled by the Jet Dust
Dog which is housed behind the shop. |
|
